Job Location: Ontario

Full-Time Raymond Reach Operator in Oakville | $22/hour (2024-07-25)

IS2 is hiring for a Tech Company that is seeking full-time Forklift operators, position can lead to a permanent position!

This is a great opportunity for growth, stability, and pay incentives. Apply today, you could start working as soon as next week!

Locations: Joshua Creek and North Service Road, Oakville, ON

Shifts:

  • Days Monday to Friday – 6:30am -3:00pm
  • Afternoons Monday to Friday – 3pm-11:30pm

What you will be responsible for (varies per position):

  • Operate MHE to load, unload and move electronic materials
  • Use RF scanners, pick and put-away orders
  • Unload, handle, and secure electronic materials
  • Properly stage/store pallets, using pump truck in assigned locations

Requirements for these positions:

  • Basic English Required (reading and writing)
  • Ability to lift 30-50 LBS
  • Valid Training Certifications and Fall Arrest
  • Experience using RF Scanners
  • CSA Safety Shoes
  • Clear Criminal Background Check
  • 2 years of forklift experience in a fast-paced manufacturing/packaging environment.
  • Mechanical skills consider an asset: a willingness to learn how to setup an erector, sealer, or work on PM for rollers/conveyors

Perks of the job:

  • Permanent employment opportunities within 90 days
  • Real opportunities for career growth
  • Competitive wages and compensation including:
  • Progressive monthly pay increases
  • Monthly and annual incentive bonus / profit share
  • RRSP match
  • Medical benefits
  • Positive and innovative work environment
  • New, clean and temperature-controlled facility

DON’T WAIT TO APPLY… REGISTER ONLINE AT WWW.IS2.CA/APPLY! Then call us at 905-821-3020 and speak to Maryan, Danielle or Yasmin!

Please be aware that we will not be able to accommodate any applicants without these documents:

  • Resume
  • 2 Pieces of Government issues Photo IDs
  • Proof of SIN
  • Direct Deposit

Refer a friend or family member and earn up to $100 per referral, speak to the Recruiter for more details!

Salary: $22 per hour

Job Types: Full-time, Permanent

Schedule:

  • 8 hour shift
  • Monday to Friday

Have we piqued your interest?

APPLY BELOW!
It’s easy! Fill in your phone number, email, and attach your resume. Our recruiters will get back to you as soon as they can.

You could be working as soon as tomorrow!

Parts Person in Tillsonburg | $18/hour (2024-07-24)

We need hard working, motivated, and dependable Parts Persons (like you!) to work for one of the top employers in Tillsonburg, ON! If this describes you – hit the blue APPLY NOW button above and get your new career started!

Pay Rate: Starting at $18.00 / hour

Shift Time(s): Afternoon shift

WHAT YOU’LL BE DOING:

  • Place parts on paint line and remove finished parts
  • Manage inventory levels and conduct regular stock checks
  • Utilize forklift equipment for handling parts
  • Fabricate parts as required using mechanical knowledge

WHAT YOU’LL NEED IN ORDER TO QUALIFY:

  • No experience needed, willing to train
  • Great energy & a positive attitude
  • The ability work independently or in a team

You deserve a job you love.

APPLY BELOW!
It’s easy! Fill in your phone number, email, and attach your resume. Our recruiters will get back to you as soon as they can.

Millwright Mechanic in Brampton | $32+/hourly (2024-07-24)

IS2 Workforce Solutions is looking for a Millwright Mechanic in Brampton.

Perks:

  • Employee Engagement Every Month
  • Family Oriented
  • RRSP Program
  • Company bike to get around plant.

Responsibilities

  • Repairing and maintaining all types of production equipment and auxiliary plant equipment.
  • Performing PM’s (Preventative Maintenance) on all production and auxiliary plant equipment as well as hands-on mechanical troubleshooting
  • Will be working with hydraulics, pneumatics (repairing and troubleshooting) as well as facility fixtures
  • Proactive in making recommendations for possible improvements to both equipment and processes
  • Fabricate jigs, fixtures, and other production tools.
  • Must be able to read blueprints and schematics
  • React to production needs to ensure that quality parts are produced and downtime due to machine breakdown is minimized.
  • Perform new equipment installations as needed.
  • Must have own tools

Qualifications

  • Licensed Millwright – 433A
  • Experience in the fabrication, assembly, and maintenance of customized machinery
  • Minimum 2-3 year of Mechanical troubleshooting within a manufacturing facility
  • Strong hands-on mechanical aptitude with thorough experience working with hydraulics, pneumatics, fixtures, etc.
  • Strong ability to work independently
  • Good communication skills verbal and written

Shift: 11:00pm to 7:00am

Pay: $32 – $37 Based on experience

Location: Brampton

You deserve a job you love.

APPLY BELOW!
It’s easy! Fill in your phone number, email, and attach your resume. Our recruiters will get back to you as soon as they can.

Welder in Tillsonburg | $19-$21/hour (2024-07-24)

We need hard working, motivated, and dependable Welders (like you!) to work for one of the top employers in Tillsonburg, ON! If this describes you – hit the blue APPLY NOW button above and get your new career started!

Pay Rate: $19.00 – $21.00 (based on experience)

Shift Time(s): Days & Afternoons

WHAT YOU’LL BE DOING:

  • Consults customer prints in order to execute jobs and tasks to specification
  • Assesses equipment, structures, materials, and job specifications for appropriate welding positions and methods
  • Monitors equipment for appropriate usage and temperature
  • Maintains CWB standards and specifications.
  • Observe and follow RIPCO ISO Standards
  • Develops working knowledge of welding specifications used for welding a variety of materials and components
  • Operates specialized equipment for industrial welding.
  • Trims metal components using heat, grinding, and plasma torches.
  • Follows safety protocol, including wearing heat-resistant gloves, protective masks, and safety shoes.
  • During operations Operator will be required to maintain cleanliness of the machine and workspace
  • Communicates all production related items to next shift operators or shift supervisors.

WHAT YOU’LL NEED IN ORDER TO QUALIFY:

  • 1 year of welding experience
  • Great energy & a positive attitude
  • The ability work independently or in a team

APPLY BELOW!

It’s easy! Fill in your phone number, email, and attach your resume. Our recruiters will get back to you as soon as they can.

Bilingual Customer Service Representative in Mississauga | $37,440/annually (2024-07-24)

IS2 Workforce Solutions is currently hiring for a Permanent Bilingual Customer Service Representative to join our client in Mississauga. This position requires you to speak in Spanish and this position is not remote!

Apply today!

Main Purpose of the Job:

Provide exceptional customer service through live chat, emails, phone calls, as well as help pick-up customers and perform general administrative duties in both Spanish and English.

Duties and Responsibilities:

  • Answer emails, live chat and phone calls in a professional, friendly, and timely manner.
  • Handle customer inquiries about transit times, product substitutions, order changes, and general questions.
  • Help customers who come in for pick-up orders
  • Processing credit, debit, or cash transactions.
  • Must be able to communicate and work with other agents and co-workers.

Qualifications:

  • High school diploma or GED
  • One to two years’ customer service experience in a fast-paced environment
  • English: Fluent– speaking, reading, and writing
  • Spanish: Fluent– speaking, reading, and writing (for bilingual agents)
  • Strong computer literacy skills
  • Average typing speed of 30 WPM
  • Detail oriented and must be able to multitask

Working Conditions:

  • Work in an office and warehouse setting.
  • Work occasional weekends

Physical Requirements:

  • Ability to lift 30 pounds
  • Able to go up and down ladders
  • Squatting, kneeling, crouching, bending, and walking
  • Visual, oral, and auditory dexterity

Shifts available:

  • Sunday to Thursday or Monday to Friday – must be comfortable working Sundays occasionally
  • Timing is 10:30AM until 7:00PM or 10:00AM until 6:30PM

Salary Range:

  • $ 37,440/annually

APPLY BELOW!

It’s easy! Fill in your phone number, email, and attach your resume. Our recruiters will get back to you as soon as they can.

Painters in Tillsonburg | $19-$20/hour (2024-07-24)

We need hard working, motivated, and dependable Painters (like you!) to work for one of the top employers in Tillsonburg, ON! If this describes you – hit the blue APPLY NOW button above and get your new career started!

Pay Rate: $19.00 – $20.00 / hour

Shift Time(s): Afternoon shift

WHAT YOU’LL BE DOING:

  • Properly administer, mix, blend, and match paint colours
  • Apply primers and repaint surfaces using brush or spray guns
  • Carry out proper examination upon completion of painting
  • Ensure equipment and hand tools are properly maintained
  • Other duties as assigned

WHAT YOU’LL NEED IN ORDER TO QUALIFY:

  • Previous painting experience preferred but willing to train the right person
  • Attendance is a must and reliability
  • Must have transportation to Tillsonburg

APPLY BELOW!
It’s easy! Fill in your phone number, email, and attach your resume. Our recruiters will get back to you as soon as they can.

You could be working as soon as tomorrow!

Production Workers in Tillsonburg | $19.50-$20.28/hour (2024-07-24)

We need hard working, motivated, and dependable Production Workers (like you!) to work for one of the top employers in Tillsonburg, ON! If this describes you – hit the blue APPLY NOW button above and get your new career started!

***DAYS, AFTERNOONS, & WEEKEND SHIFTS AVAILABLE***

PAY RATE:

  • Days – $19.50/hr
  • Afternoons – $20.28/hr
  • Weekends – $19.50/hr

WHY YOU’LL WANT THIS JOB:

  • Jump-start your career with a top employer in an exciting industry
  • Full time hours with 3 DAYS OFF IN A ROW!
  • Plenty of career advancement opportunities
  • Great pay with option to earn extra income with overtime and shift premiums!

WHAT YOU’LL BE DOING:

  • Producing parts at an established rate and quality standard
  • Maintaining accurate records & reporting production issues
  • Keeping workstation clean, following safety guidelines, & putting parts in containers

WHAT YOU’LL NEED IN ORDER TO QUALIFY:

  • Great energy & a positive attitude
  • The ability work independently or in a team
  • No previous production experience is required

APPLY BELOW!
It’s easy! Fill in your phone number, email, and attach your resume. Our recruiters will get back to you as soon as they can.

You could be working as soon as tomorrow!

Shipper/Receiver in Brampton | $23/hour (2024-07-23)

IS2 is seeking motivated individuals for the position of Shipper / Receiver. The role is pivotal in managing our shipping and receiving operations, requiring proficiency with Raymond reach and counterbalance forklifts. Initially, the role will operate on a split shift, with potential future rotation through day, afternoon, and night shifts.

To apply, please fill out the form via the following link: https://forms.office.com/r/Ur3XiBEQUs

Pay Rate: $23 / hour

Shift Times: Initially 11 am to 7:30 pm, with potential for morning, afternoon, or night shifts

JOB LOCATION:

  • Near Walker Drive and North Park Drive, Brampton, Ontario

WHAT YOU’LL BE DOING:

  • Efficiently handle shipping and receiving of packages using forklifts.
  • Adapt to variable work hours.

WHAT YOU’LL NEED IN ORDER TO QUALIFY:

  • Safety shoes
  • Completion of job forms online prior to commencement
  • Valid forklift license
  • Minimum one year of relevant experience

Have we piqued your interest yet?

APPLY BELOW!
It’s easy! Fill in your phone number, email, and attach your resume. Our recruiters will get back to you as soon as they can.

Mechanical Design Engineer in Mississauga | (2024-07-23)

IS2 Workforce Solutions is hiring a Mechanical Design Engineer in Mississauga! Does this sound like an opportunity for you? Apply today!

Duties & Responsibilities:

  • Design custom machinery for the sheet metal industry from concept to final assembly.
  • Provide accurate engineering packages, including technical drawings with GD&T, calculations, and designs within budget and agreed timelines.
  • Support and facilitate design reviews and sign off the release of mechanical designs in the ERP system.
  • Collaborate with external suppliers to design products and equipment that comply with design specifications and are cost-effective to manufacture.
  • Respond promptly to engineering change requests, following company procedures, and progress them through the design office to completion.
  • Conduct research and gather background information from various sources to support mechanical design decisions.

Skills & Qualifications:

  • Bachelor’s degree in mechanical engineering
  • At least 3 years of experience in similar technical roles
  • Proficiency in machine design and calculations
  • Familiarity with FEA simulation, dynamics/mechanical analysis
  • Working knowledge of SolidWorks or other similar CAD packages
  • Proficiency in Microsoft Office, including Word, Excel, and PowerPoint
  • Experience in creating technical drawings, documentation, and specifications
  • Strong understanding of engineering calculations, material properties, hydraulics, pneumatics, machine elements, automation, and control targets and work a flexible schedule that includes planned, unplanned, and on-call shifts.

Job Type: Full-time

Salary- TBD

Schedule: 8 AM TO 5 PM

APPLY BELOW!
It’s easy! Fill in your phone number, and email, and attach your resume. Our recruiters will get back to you as soon as they can.

CNC Machinist in Mississauga | $28.00/hour (2024-07-22)

We are looking for a qualified & experienced CNC Programmer & Operator to join a great company in Mississauga, ON. If you are interested… Apply now because this job will be filled quickly.

Pay Rate: Up to $28.00 / hour (depends on experience)

Temporary to Permanent hire, benefits after 3 months probationary period

Shift Times: 8 am to 4:30 pm – Monday to Friday

WHAT YOU’LL BE DOING:

  • Set up & operate machines
  • Operate CNC Milling Machines 3-axis
  • Operate CNC Lathe Machines 2-axis
  • Reading & interpreting blueprints
  • Maintaining safe & clean working environment
  • Other duties as requested.

WHAT YOU’LL NEED IN ORDER TO QUALIFY:

  • Must have 3+ years of experience as a CNC machinist
  • Must have 3+ years of experience with milling machines
  • Must have experience in Mastercam
  • Knowledge of vernier measurements.
  • Able to work in fast-pace environment and self-motivated.
  • Can work independently and within a team

APPLY BELOW!
It’s easy! Fill in your phone number, email, and attach your resume. Our recruiters will get back to you as soon as they can.

READY TO WORK
READY TO HIRE

GET THE RIGHT PEOPLE WORKING FOR YOU.

Let us look after you, so you can look after your business.

EXPLORE OUR TECHNOLOGIES > LEARN MORE ABOUT OUR SERVICES > CONTACT US TODAY >

WANT A GREAT CAREER?

APPLY NOW.

    © IS2 Workforce Solutions Copyright 2020 Test Link

    For instructions on how to access your 2024 T4 -
    [CLICK HERE]
    Attention IS2 Employees: T4s will not be mailed this year. To access your T4 for 2020.